352-2138 Water Pump AS | CAT C7 3126B 3126E Engine GP

Article Content

Title: High-Performance 352-2138 Water Pump AS for CAT C7 3126B 3126 3126E Engine – Water Pump GP

Proper engine cooling is essential for maximizing the performance and service life of Caterpillar diesel engines. For the CAT C7, 3126B, 3126, and 3126E engine families, the 352-2138 water pump AS (also referenced as 3522138 water pump GP) is a critical component that ensures consistent coolant circulation. Whether you are operating a CAT excavator, wheel loader, motor grader, or bulldozer, this direct replacement water pump delivers the flow rate and durability required for demanding construction, agricultural, and industrial applications.

video download

website

Engineered for CAT C7, 3126B, 3126, and 3126E Engines

The CAT C7 is a 7.2L inline 6-cylinder diesel engine widely used in heavy-duty equipment, while the 3126B (7.2L) and 3126E are popular mid-range electronic diesel platforms. The 352-2138 water pump AS is a complete assembly featuring a heavy-duty cast housing, a precision-balanced impeller, high-temperature mechanical seals, and a maintenance-free bearing unit. This water pump GP is designed to maintain optimal engine temperature between 80°C and 95°C, even under full-load conditions in extreme environments. With a flow rate capable of reaching approximately 200 liters per minute, the 352-2138 water pump ensures efficient heat dissipation across the entire cooling system.

Compatibility: Engine Models

The 352-2138 water pump is compatible with the following Caterpillar engine families:

• CAT C7, CAT C7.1, CAT C7.2

• CAT 3126, CAT 3126B, CAT 3126E

• CAT C9.3 (select applications)

• CAT 3116 (select applications)

Compatible Equipment – Detailed Model List

This water pump AS is a direct replacement for a vast range of Caterpillar machinery. Below is a comprehensive list of compatible equipment models:

• Motor Graders:
  120H, 120K, 120K2, 12K, 12M, 135H, 140G, 140K, 140K2, 140M, 160K

• Excavators:
  322C, 322CFM, 324D, 324DFM, 324DFMLL, 324DL, 324DLN, 325C, 325CFM, 325D, 325DFM, 325DFMLL, 325DL, 325DMH, 326DL, 328DLCR, 329D, 329DL, 329DLN, M325CMH, M325DLMH, M325DMH, E324D, E325D, E329D

• Wheel Loaders:
  938GII, 950GII, 953C, 962GII, 963C, IT38GI, IT62GI

• Track Tractors (Bulldozers):
  D5N, D6N, 561N

• Asphalt Pavers:
  AP-1055D, BG-2455D, BG-260D

• Generator Sets:
  CAT generator drive units powered by C7, 3126B, or 3126E engines

Why Choose This 352-2138 Water Pump AS?

1. OEM Equivalent Quality: Manufactured with high-grade cast iron or aluminum housing, ceramic or silicon carbide mechanical seals, and precision bearings that meet or exceed original specifications.

2. Direct Bolt-On Replacement: No modifications required – matches factory mounting points, pulley alignment, and coolant port configurations.

3. Superior Corrosion Resistance: The impeller is treated to resist erosion from modern coolants, extending the service life of the entire cooling system.

4. Cross-Reference Compatibility: This water pump GP is also referenced under alternative part numbers including 236-4420, CA3522138, and is compatible with applications listing 352-2139 and 352-2080 for the same engine platforms.

Signs Your Water Pump Needs Replacement

Caterpillar C7 and 3126B engine operators should watch for the following common failure indicators:

• Coolant Leakage: Visible coolant residue around the weep hole or pump housing – the most common failure (approximately 45% of cases), often due to seal老化 or improper installation.

• Bearing Noise: A whining, grinding, or metal-on-metal sound that increases with engine RPM (approximately 30% of cases). If accompanied by an overheating alarm, immediate shutdown and replacement are required.

• Overheating: Rising coolant temperature under normal load, often caused by reduced circulation from a worn or damaged impeller.

• Poor Coolant Circulation: Slow or uneven coolant flow, visible through the radiator fill cap when the engine is running at operating temperature.

• Impeller Corrosion or Damage: Often resulting from low-quality coolant or mixing incompatible coolant brands – can cause impeller perforation within months.

• Rough Idle or Engine Instability: Water pump drag from a seized bearing or impeller can transmit resistance through the accessory drive belt, affecting engine idle quality.

Installation Recommendations

To ensure proper fitment and long service life, follow these guidelines:

• Always replace the water pump gasket or O-ring seal (sold separately if not included).

• Drain the cooling system completely before removal – capture and dispose of coolant properly.

• Clean all mating surfaces thoroughly – use a gasket scraper and brake cleaner to remove old sealant.

• Inspect the drive belt and tensioner for wear; replace if necessary.

• Torque mounting bolts to CAT specifications (typically 25-35 Nm for M8 bolts, consult your service manual for exact values).

• Refill with high-quality coolant (pH 7.5-11 range) – using OEM-recommended coolant extends seal and bearing life.

• After installation, run the engine and inspect for leaks before returning equipment to service.

Conclusion

The 352-2138 (3522138) water pump AS for CAT C7, 3126B, 3126, and 3126E engines is an essential component for maintaining proper engine cooling and preventing costly overheating damage. Whether you are repairing a 325D excavator, a 140M motor grader, a 950GII wheel loader, or a D6N bulldozer, this water pump GP delivers the flow, durability, and fitment you need.

Order your 352-2138 water pump today and keep your CAT equipment running at peak performance.