When it comes to repowering or replacing a worn industrial diesel engine, using a complete engine assembly ensures reliability, performance, and minimal downtime. The 460-5760 engine GP (also referenced as 4605760) is a complete Caterpillar engine assembly for the 3054C and C4.4 engine platforms, commonly found in the CAT 313D2 excavator and other industrial applications. This drop-in engine GP includes the long block, fuel system, cooling system components, and necessary bolt-on accessories. Whether you are replacing a failed engine or performing a major equipment repower, this OEM-grade industrial diesel engine assembly delivers the power, efficiency, and durability Caterpillar is known for.
Engineered for Caterpillar 3054C and C4.4 Platforms
The Caterpillar 3054C and C4.4 are 4-cylinder, 4.4L turbocharged diesel engines widely used in compact excavators, skid steers, backhoe loaders, telehandlers, and generator sets. The 460-5760 engine GP is a complete factory-remanufactured or new engine assembly that includes the cylinder block, cylinder head, crankshaft, pistons, connecting rods, camshaft, valve train, fuel injection system (mechanical unit injection or common rail depending on variant), water pump, oil pump, flywheel housing, and front cover. This engine assembly is calibrated to meet original emissions standards (Tier 3 or Tier 4 interim, depending on the application).
Technical Specifications (Typical – verify for your application):
-
Displacement: 4.4L (269 cubic inches)
-
Cylinders: 4, inline
-
Aspiration: Turbocharged (with or without aftercooler)
-
Fuel System: Mechanical unit injection (3054C) or common rail (C4.4)
-
Power Range: 80-110 hp (60-82 kW) depending on tuning
-
Torque: 250-350 lb-ft (340-475 Nm)
Compatibility: Caterpillar Engine Models
This engine GP is compatible with the following Caterpillar engine families:
-
Caterpillar 3054C (Tier 3)
-
Caterpillar C4.4 (Tier 3 / Tier 4 Interim)
-
Caterpillar 3054E (some variants)
Compatible Caterpillar Equipment – Detailed Model List:
-
Excavators:
313D2, 313D2 GC, 313D2 L, 313D2 XE
312D2 (with C4.4)
314D CR, 314D LCR (with C4.4)
315D L (some variants) -
Backhoe Loaders:
416F, 416F2, 420F, 420F2, 422F, 428F, 430F, 432F, 434F, 444F -
Skid Steers & Compact Track Loaders:
236D, 242D, 246D, 252D, 257D, 259D, 262D, 272D, 277D, 279D, 287D, 289D, 297D, 299D -
Wheel Loaders:
906M, 907M, 908M -
Telehandlers:
TH255, TH336, TH337, TH351, TH355, TH357, TH360, TH363, TH370, TH380, TH406, TH407, TH414, TH417, TH514, TH517 -
Generator Sets:
Cat XG40, XG50, XG60, XG75, XG80 (with C4.4 engine) -
Industrial Power Units:
Caterpillar industrial engines for pumps, compressors, crushers, and material handlers
Why Choose This 460-5760 Engine GP?
-
Complete Assembly: Includes long block, fuel system, water pump, oil pump, flywheel housing, and front cover – ready to install.
-
OEM Quality: Manufactured or remanufactured to Caterpillar specifications with genuine or OEM-equivalent components.
-
Dyno Tested: Each engine GP is tested for oil pressure, compression, and fuel system performance before shipment.
-
Direct Fit: Matches original mounting points, engine mounts, bellhousing pattern (SAE 3 or SAE 4), and accessory drive configurations.
What’s Typically Included in the Engine GP Assembly?
-
Cylinder block (with liners or parent bore)
-
Cylinder head (fully assembled with valves, springs, seals)
-
Crankshaft and main bearings
-
Camshaft and followers
-
Connecting rods and pistons with rings
-
Oil pump and oil pan
-
Water pump and thermostat housing
-
Flywheel and flywheel housing
-
Front cover and gear train
-
Fuel injection pump (mechanical or common rail pump)
-
Fuel injectors (installed)
-
Turbocharger (installed)
-
Intake and exhaust manifolds
-
Gasket set (installed)
-
Not included (check your application): Alternator, starter motor, flexplate or flywheel ring gear, engine wiring harness, ECM (on C4.4 electronic versions), engine mounts, cooling fan
Signs You Need a Complete Engine GP Replacement
-
Major engine failure (cracked block, spun bearings, seized crankshaft)
-
Excessive oil consumption with low compression across all cylinders
-
Repeated overheating causing head gasket failure or warped cylinder head
-
High hour operation (10,000+ hours) with declining performance
-
Cost of individual repairs exceeds value of exchange engine
Installation Recommendations
-
Disconnect all electrical, fuel, coolant, and hydraulic connections from the old engine.
-
Use a lifting beam to remove the old engine GP.
-
Transfer reusable accessories (alternator, starter, ECM, wiring harness) if not included.
-
Install new engine mounts and align the bellhousing.
-
Torque flywheel-to-converter or flywheel-to-transmission bolts to specification.
-
Refill with Caterpillar-approved engine oil (15W-40 or 10W-30 depending on climate) and coolant.
-
Prime the fuel system before first start.
-
Perform initial startup and break-in procedure per Caterpillar guidelines.
Conclusion
The 460-5760 (4605760) engine GP for Caterpillar 3054C, C4.4, and 313D2 is the complete solution for repowering your CAT equipment. Whether you are replacing an engine in a 313D2 excavator, a 420F backhoe, a 299D skid steer, or a 908M wheel loader, this industrial diesel engine assembly delivers plug-and-play installation and factory-grade reliability.
Order your 460-5760 engine GP today and get your Caterpillar equipment back to full operating condition.
All products